Supermicro 6027AX-72RF-HFT1, User Manual

Page: 62 / 126

5-16
S
UPER
S
ERVER 6027AX-72RF/TRF-HFT1/HFT2/HFT3 User's Manual
Reset Button
The Reset Button connection is located on
pins 3 and 4 of JF1 and attaches to the reset
switch on the computer chassis. See the
table on the right for pin de
fi nitions.
Power Button
The Power On connection is on pins 1 and
2 of JF1. These should be connected to the
chassis power button. See the table on the
right for pin de
fi nitions.
5-8 Connector Defi nitions
Reset Button
Pin Defi nitions (JF1)
Pin# De fi nition
3 Reset
4 Ground
Power Button
Pin Defi nitions (JF1)
Pin# De fi nition
1 Power Signal
2 Ground
Warning
: To provide adequate
power supply to the motherboard,
be sure to connect the 24-pin ATX
PWR (JPW1) and
two
8-pin PWR
connectors (JPW2, JPW3) to the
power supply. Failure to do so will
void the manufacturer warranty
on your power supply and moth-
erboard.
Power Connectors
A 24-pin main power supply connector(JPW1)
and two 8-pin CPU PWR connectors
(JPW2/2) are located on the motherboard.
These power connectors meet the SSI EPS
12V speci
fi cation. These power connectors
must also be connected to your power
supply. See the table on the right for pin
de
fi nitions.
ATX Power 24-pin Connector
Pin Defi nitions
Pin# De fi nition Pin # De fi nition
13 +3.3V 1 +3.3V
14 -12V 2 +3.3V
15 COM 3 COM
16 PS_ON 4 +5V
17 COM 5 COM
18 COM 6 +5V
19 COM 7 COM
20 Res (NC) 8 PWR_OK
21 +5V 9 5VSB
22 +5V 10 +12V
23 +5V 11 +12V
24 COM 12 +3.3V
12V 8-pin PWR Connector
Pin Defi nitions
Pins De fi nition
1 through 4 Ground
5 through 8 +12V
(Required)