Supermicro 5038K-i, User Manual

Page: 61 / 146

Chapter 5: Advanced Motherboard Setup
5-17
LAN Port Enable/Disable
JPL1 is used to enable or disable
the LAN port on the motherboard.
The default setting is Enabled. See
the tables on the right for link speed
support and jumper settings.
LAN Port Enable
Jumper Settings (JPL1)
Jumper Setting Defi nition
Pins 1-2 Enabled (default)
Pins 2-3 Disabled
LAN Link Speed
Support
Jumper SKU Name
GbE LAN K1SPE
Watch Dog Enable/Disable
Watch Dog (JWD1) is a system monitor
that can reboot the system when a
software application hangs. Close pins
1-2 to reset the system if an application
hangs. Close pins 2-3 to generate
non-maskable interrupt signals for the
application that hangs. See the table
on the right for jumper settings. Watch
Dog must also be enabled in the BIOS.
Watch Dog
Jumper Settings (JWD1)
Jumper Setting Defi nition
Pins 1-2 Reset (default)
Pins 2-3 NMI
Open Disabled
VGA Enable
Jumper JPG1 allows the user to
enable the onboard VGA connector.
The default setting is 1-2 to enable the
connection. See the table on the right
for jumper settings.
VGA Enable
Jumper Settings (JPG1)
Jumper Setting Defi nition
Pins 1-2 Enabled (Default)
Pins 2-3 Disabled