Supermicro 5038K-i, User Manual

Page: 104 / 146

7-24
5038K-i User's Manual
Confi gure sSATA as
Select IDE to confi gure an sSATA drive specifi ed by the user as an IDE drive. Select
AHCI to confi gure an sSATA drive specifi ed by the user as an AHCI drive. Select
RAID to confi gure an sSATA drive specifi ed by the user as a RAID drive. The op-
tions are IDE, AHCI , and RAID.
*If the item above "Confi gure sSATA as" is set to AHCI, the following items will
display:
SATA Test Mode
Select Enabled to enable SATA Test mode support. The options are Enabled and
Disabled .

SATA Mode Options
SATA HDD Unlock
Select Enabled to allow the user to set a password to unlock an HDD device in
the OS. The options are Enabled and Disabled.
SATA LED Locate
Select Enabled when an LED or an SPGIO hardware device is attached to the
SATA connections. The options are Enabled and Disabled.
sSATA AHCI LPM (Link Power Management)
Select Enabled to support Link Power Management for the onboard sSATA AHCI
connections. The options are Enabled and Disabled.
sSATA AHCI ALPM (Aggressive Link Power Management)
When this item is set to Enabled, the sSATA AHCI controller manages the power
usage of the sSATA link. The controller will put the link to a low power state when
the I/O is inactive for an extended period of time, and the power state will return
to normal when the I/O becomes active. The options are Enabled and Disabled.
sSATA Port 0~ Port 5
This item displays the information detected on the installed sSATA drive on the
particular sSATA port.
•
Model number of drive and capacity
•
Software Preserve Support
Port 0~ Port 5
Select Enabled to enable an sSATA port specifi ed by the user. The options are
Disabled and Enabled .