Supermicro 440LX, Reference Manual

Page: 41 / 45

BIOS User’s Manual
B-6
Check
Point
Description
62 The DMA controller 1 base register test passed.
Performing the DMA controller 2 base register test next.
65 The DMA controller 2 base register test passed.
Programming DMA controllers 1 and 2 next.
66 C o m p l e t e d p r o g r a m m i n g D M A c o n t r o l l e r s 1 a n d 2 .
Initializing the 8259 interrupt controller next.
7F Extended NMI source enabling is in progress.
80 The keyboard test has started. Clearing the output
b u f f e r a n d c h e c k i n g f o r s t u c k keys. Issuing the
keyboard reset command next.
81 A keyboard reset error or stuck key was found. Issuing
the keyboard controller interface test command next.
82 The keyboard controller interface test completed.
W riting the command byte and initializing the circular
buffer next.
83 T h e c o m m a n d b y t e w a s w r i t t e n a n d g l o b a l d a t a
initialization has been completed. Checking for a
locked key next.
84 Locked key checking is over. Checking for a memory
size mismatch with CMOS RAM data next.
85 The memory size check is done. Displaying a soft error
and checking for a password or bypassing WINBIOS
Setup next.
86 The password was checked. Performing any required
programming before W INBIOS Setup next.
87 T h e p r o g r a m m i n g b e f o r e W I N B I O S S e t u p h a s
been completed. Uncompressing the W INBIOS Setup
code and executing the AMIBIOS Setup or WINBIOS
Setup utility next.