Supermicro 2028UT-BC1NRT, User Manual, Page: 96 / 138

7-18
SUPERSERVER 2028UT-BTNRT/BC1NRT User’s Manual
Corr (Correctable) Err (Error) Over
Select Enable to force the correctable error propogation to the II0 core-error-logic
for the port specified by the user. The options are Disable and Enable.
L0s Support
When this item is set to Disable, II0 will never put its transmitter in the L0s state.
The options are
Disable
and Enable.
PM ACPI Support
Select Enable to generate an _HPGPE message on a PM ACPI event. Select
Disable to generate an MSI message. The options are
Disable and Enable.
Gen3 (Generation 3) Eq (Equalization) Mode
Use this item to set the "Adaptive Equalization" mode for PCI-E Generation 3
devices. The options are
Auto , Enable Phase 0, 1, 2, 3; Disable Phase 0, 1, 2,
3; Enable Phase 1 Only, Enable Phase 0, 1 Only, and Advanced.
Gen3 (Generation 3) Spec (Specifics) Mode
Use this item to set the Specifics mode for PCI-E Generation 3 devices. The
options are Auto , 0.70 July, 0.70 Sept and 071 Sept.
Gen3 (Generation 3) Phase2 Mode
Use this item to set the PCI-E Generation 3 Phase 2 mode. The options are
Hardware Adaptive
and Manual.
Gen3 (Generation 3) DN TX Preset
Use this item to set the Preset mode for PCI-E Gen3 downstream transactions
(from the master device to a slave device). The options are
Auto , P0 (-6.0/0.0
dB), P1 (-3.5/0.0 dB), P2 (-4.5/0.0 dB), P3 (-2.5/0.0 dB), P4 (0.0/0.0 dB), P5
(0.0/2.0 dB), P6 (0.0/2.5 dB), P7 (-6.0 /3.5 dB), P8 (-3.5/3.5 dB), and P9 (0.0/3.5
dB).
Gen3 (Generation 3) DN TX Preset Hint
Use this item to set the Preset Hint mode for PCI-E Gen3 downstream
transactions (from the master device to a slave device). The options are
Auto ,
P0 (-6.0 dB), P1 (-7.0 dB), P2 (-8.0 dB), P3 (-9.0 dB), P4 (-10.0 dB) P5 (-11.0
dB), and P6 (-12.0 dB).
Gen3 (Generation 3) Up TX Preset
Use this item to set the Preset mode for PCI-E Gen3 upstream transactions (from
a slave device to the master device).The options are
Auto , P0 (-6.0/0.0 dB),