OEM MOPA Light Sources. User Manual.
Document ID:
SL.3328.01.000RE / Rev. 1.0, Date: 25/09/2020 Page
18
of
23
APPENDIX A
Downloading and Installing Procedures to Establish
Computer Communication and Control
Connecting to Light Source via USB
When the Light Source is connected via USB for first time, the OS driver installer will automatically run the
process of device initialization (assigning COM port). It may take few minutes until the process will be
completed. Corresponding icon of the installer must appear in the system tray.
Upon completion of the process COM port number will be automatically assigned to the device. Port number
can be checked by clicking on the installer icon on the system tray.
If the automatic initialization process failed on the computer in use, please refer to a manual installing of
drivers as recommended by FTDI, the manufacturer of the
embedded Serial-to-USB converter
http://www.ftdichip.com/Drivers/VCP.htm
