manualshive.com logo in svg

SuperLogics SL-PPC-154P4T, User Manual

Share
Download
SuperLogics SL-PPC-154P4T User Manual Download Page 33

25

Chapter 3  

3.9  VGA Port

An external VGA-compatible device may be connected to the system 
through the 15-pin external port located on the rear of the system unit. 
The panel PC simultaneously supports an external CRT monitor in addi-
tion to its own LCD display.
1.

Be sure the panel PC is turned off.

2.

Connect the external monitor to the system. (See Fig. 3-5.)

3.

Turn on the panel PC and the external monitor.

3.10  Game Port

An external game device may be connected to the system through the 15-
pin external port located on the rear of the system unit.
1.

Be sure the panel PC is turned off.

2.

Connect the external joystick or game device to the system. (See 
Fig. 3-5.)

3.

Turn on the panel PC and the external joystick or game device (if 
applicable).

4.

Install the driver before you use the joystick or game device.

3.11  USB Ports

An external USB device may be connected to the system through the 4-
pin USB ports located on the rear side of the system unit.
1.

Connect the external device to the system. (See Fig. 3-4.)

2.

The USB ports support hot plug-in connection. You should install 
the device driver before you use the device.

Summary of Contents for SL-PPC-154P4T







































































Reviews:

No comments

Brands by name

Popular brands

Load more brands