24
OPTIONAL INSTALLATION ACCESSORIES
Installation Accessories
Description
Cat./ Part No.
Decorative Cast Iron Door
(Required - Order Separately)
Arch Shape Door, Black,
BPVBK
F1854
Gravity Kit
Gravity kit:
Complete double duct system includes: 2 elbows
90º, 2 telescopic lengths, 2 grill supports and 2 black grills,
2 fi replace adaptors, 7B30ZK-1
H8947
Gravity Kit Accessories
Elbow 90º, 8” dia., 7B26ZE90
H8948
Elbow 45º, 8” dia., 7B26ZE45
H8949
Telescopic length, 8” dia. (15” to 26”), 7B26ZLA
H8950
Adjustable length 8” dia (2” - 5”), 7B26ZL2A
H8951
Length two (2) feet, 8KL2
H8954
Length one (1) feet, 8KL1
H8953
Wall radiation shield, 8” I.D., 7B26ZR
H8952
Outside Air Kit (Required - Included with Fireplace)
Outside Air Coupler to Connect Outside Air UZI to Fireplace,
UZIAD
UZIAD
Outside Air Ducting - Includes 4 in. Insulated Flex x 10 ft.
long, UZI
UZI
Fireplace Options
Del Sol Louver Kit
DEL SOL
Diamante Louver Kit
DIAMANTE
Fiori Louver Kit
FIORI
Luna Louver Kit
LUNA
Strada Louver Kit
STRADA
Panel for Clean Face Option (requires gravity kit)
BPCF
Blower
UZY5
Blower Motor Speed Control
VRUW
Rigid Firescreen
BPZN
Fireplace Model WRT4826WH - Approved Venting Components
7" Diameter Chimney
- Model ASHT+, S2100+, , or ACBI
manufactured by Security Chimneys International™ only.
7" Diameter Chimney for Relining Masonry Chimneys
- Tubinox® chimney (or
Projet
®
SS), 7" diameter with adaptor for installation in a masonry chimney.
NOTES:
(Projet Nova Temp
®
) is equivalent to S2100+
(Projet Nova Temp) and DuraTech
®
DTC are equivalent to ASHT+
This appliance is equipped with the ASHT Chimney Adaptor. When other
chimney is used, a chimney adaptor for the chimney will be required.
Chimney Adaptor (S2100+ / ) for CANADA ONLY - If you want to
install a S2100+ / chimney, an adaptor is available (7UCA).
AC Chimney is Not recommended at elevations above 4000 feet or in cold
climates, where temperatures fall below 32° F (0 ° C). When using AC chimney,
an ACBI7SBA (H3805) starter section must be used before installing an elbow.
When an offset is needed immediately off the top of the fi replace, an elbow
starter section is available, ACBI7SBA30 (H3806), is available.
Not tested under EPA certifi cation. If installed, this appliance no
longer qualifi es for EPA certifi cation. Check with local authorities
having jurisdiction for requirements in your area.
Central Forced Air Kit Accessories
Central Forced Air Kit, Central forced air kit including: blower
(BISZY), fl ex adaptor (BISAF), 2 clamps, variable speed
control (VRUW), thermo-disk (VTU), fan to fl exible pipe
adapter (BISAVF), back draft damper (BISBD), aluminium
tape, BISFWK-1
BISFWK-1
Flexible pipe 5” I.D. x 15 ft. Long, 5FLEX15
5FLEX15
Flexible pipe 5” I.D. x 30 ft. Long, 5FLEX25
5FLEX25
Heating and cooling thermostat, 24V, HCTW
HCTW
