(AC) Air-Cooled Chimney System*
6” I.D. and 11” O.D. Air Cooled, Stainl. Steel inner and zinc coated steel exterior
AC Starter Adaptors
One of the following adaptors is required
if installing an AC chimney system
* AC Chimney is NOT recommended at elevations above 4,000 feet or in cold climates
(climates where temperatures will fall below 32° F / 0° C).
Description
Cat./Part No.
Starter Section (adaptor), 6”, AC, AC6SB
H3779
Starter 30º Elbow, 6” AC, AC6SB30
H3780
The following outside air kit is required if installing an AC chimney system
Chimney Outside Air Kit (flex, insulation, outside register
and coupling), ACZI
H1967
Lengths and Misc. Chimney Components
12” Length, 6” Dia. x 12” Long, AC6L12
H0472
18” Length, 6” Dia. x 12” Long, AC6L18
H0473
36” Length, 6” Dia. x 36” Long, AC6L36
H0474
48” Length, 6” Dia. x 48” Long, AC6L48
H0475
15º Elbow, 6” Dia., AC6E15
H0476
30º Elbow, 6” Dia., AC6E30
H0477
Rain Termination Cap, 6” Dia., AC6CPR
H0478
Spark Arrester Screen (universal spark arrester band), PE
PE
Wall Band, XBM
XBM
Supports
Offset Support, SO
SO
Support Section, AC6SL
H0481
Roof Support, ST
ST
Roof Brace, BS2
BS2
Roof Flashings
Flat Roof Flashing, ACF
H0494
1/12 - 7/12 (5º - 30º), AC Adj. Roof Flashing, FA
H0495
8/12 - 12/12 (30º - 45º), AC Adj. Roof Flashing, FB
H0496
Storm collar, ACFC
H0500
Misc.
Telescopic attic radiation shield, ACRST
H0498
Firestop, ACBF
H0485
Radiation Shield, ACRS
H0486
Attic Radiation Shield, ACRSA
H0487
Insulated Wall Radiation Shield, 30º, ACRSMI30
H0489
Tubinox™ LL Chimney Lining System
Rigid Stainless Steel Liner For Relining A Masonry Chimney, 6” Diameter
Listed to ULC-S635M, UL-1777 and ULC-S640M at 2100º F
Description
Cat./Part No.
6” Length, 6” Dia., 6LL6
6LL6
12” Length, 6” Dia., 6LL12
6LL12
24” Length, 6” Dia., 6LL24
6LL24
36” Length, 6” Dia., 6LL36
6LL36
48” Length, 6” Dia., 6LL48
6LL48
Adjustable Length (7” to 11”), 6” Dia., 6L7A
6L7A
Split Base Tee, 6” Dia., 6LT
6LT
Tee Cap, 6” Dia., 6TCS
6TCS
Twist Lock Tee Cap, 6” Dia., 6LTC
6LTC
Elbow 30º, 6” Dia., 6LE30
6LE30
Elbow 45º, 6” Dia., 6LE45
6LE45
Elbow 90º, 6” Dia., 6LE90
6LE90
Rain Termination Cap (regular), 6” Dia., 6LCS
6LCS
Rain Termination Cap (deluxe), 6” Dia., 6LCC
6LCC
Spark Arrester Screen (universal spark arrester band), PE
PE
Supports
Top Support, 6LST
6LST
Support Assembly, 6LSA
6LSA
Interior Support, 6LSB
6LSB
Adaptor Flexible Pipe (male), 6LAAM
6LAAM
Adaptor Flexible Pipe (female), 6LAAF
6LAAF
Stainless Steel Flex - five (5) feet Long, 6LLFLEX
6LLFLEX
Adjustable Insulated Wall Radiation Shield 6” - 12”, 6LRSMI
6LRSMI
Adaptors to Masonry Chimney
Masonry Chimney Adaptor, 45º, BISUMA
(for use with Tubinox liner) CANADA ONLY
BISUMA
Masonry Chimney Adaptor, 30º, BISUMA30
(for use with Tubinox liner)
BISUMA30
SECURITY CHIMNEYS™ - PARTS AND COMPONENTS LISTS
The components listed below must be ordered from Security Chimneys International™. Contact your Security Chimneys Distributor or Dealer for ordering
information.
Security Chimneys International Limited
2125 Monterey, Laval, Quebec
Canada, H7L 3T6
www.securitychimneys.com
450-973-9999
1-800-361-4909 (USA)
1-800-667-3387 (Canada)
Gravity Kit Accessories
Elbow 90º, 8” dia., 7B26ZE90
7B26ZE90
Elbow 45º, 8” dia., 7B26ZE45
7B26ZE45
Telescopic length, 8” dia. (15” to 26”), 7B26ZLA
7B26ZLA
Adjustable length 8” dia (2” - 5”), 7B26ZL2A
7B26ZL2A
Wall radiation shield, 8” I.D., 7B26ZR
7B26ZR
Black grill with support, 7B30ZO
7B30ZO
Brass grill (for 7B30ZK), 7B30ZGB
7B30ZGB
Length one (1) feet, 8KL1
8KL1
Length two (2) feet, 8KL2
8KL2
Length three (3) feet, 8KL3
8KL3
Length four (4) feet, 8KL4
8KL4
Length five (5) feet, 8KL5
8KL5
28
