Superior WRE3042RH, Installation And Operation Instructions Manual

Page: 20 / 24

Superiorfireplaces.US.com 127055-01E
20
IMPORTANT NOTICE
A manufactured shroud which
has been approved by a na-
tional testing agency for use
with this fireplace may be used
if installed in accordance with
the instructions by its manu-
facturer. A locally fabricated
shroud may be used with IHP
Shroud Leg Spacer Kit (SLK)
in accordance with instructions
provided with the shroud.
Canadian฀code฀CAN/ULC-S610-M87฀and฀other฀pertinent฀
codes require stainless steel chimney for the installation
of฀this฀ireplace.฀A฀Cold฀Air฀Climate฀Kit฀is฀also฀required฀
in฀Canada฀and฀is฀recommended฀for฀cooler฀regions฀in฀the฀
United States. Below, find a list of approved stainless
steel parts.
Chimney Parts List for Canada
Catalog
No.
Model No.
8" Hi-Temp
Wood burning Chimney
F0881
12-8HT 12"฀Section฀Hi-Temp฀Double฀
Wall Pipe Snap Lock
F0882
18-8HT 18"฀Section฀Hi-Temp฀Double฀
Wall Pipe Snap Lock
F0883
24-8HT 24"฀Section฀Hi-Temp฀Double฀
Wall Pipe Snap Lock
F0884
36-8HT 36"฀Section฀Hi-Temp฀Double฀
Wall Pipe Snap Lock
F0885
48-8HT 48"฀Section฀Hi-Temp฀Double฀
Wall Pipe Snap Lock
F0886
30E-8HT 30฀Degree฀Hi-Temp฀Offset฀
and Return
F0887
12S-8HT Hi-Temp฀Chimney฀Support฀
(For฀Use฀With฀Chimney฀
Heights฀In฀Excess฀of฀30')
F0888
RT-8HT Hi-Temp฀Round฀Top฀with฀
Mesh Screen
F0889
RTT-8HT* Hi-Temp฀Round฀Top฀with฀
Mesh Screen and Slip Sec-
tion
F0890
RLT-8HT Hi-Temp฀Round฀Top฀with฀
Louvered Screen
F0891
RLTT-8HT* Hi-Temp฀Round฀Top฀with฀
Louvered Screen and Slip
Section
F0892
ET-8HT* Hi-Temp฀Pyramid฀Top฀with฀
Slip Section
F0893
ETL-8HT* Hi-Temp฀Large฀Pyramid฀Top฀
with฀Slip฀Section฀(use฀with฀all฀
8"฀systems)
F0894
AP-8HT Hi-Temp฀Anchor฀Plate/Col
-
lar฀Assembly฀(for฀masonry฀
ireplaces)
F0929
CAK-8 Cold฀Air฀Collar฀Kit฀-฀8"฀
Chimney
*When ordered alone, this part cannot ship via parcel
delivery services.
NOTICE: The firebox canopy (hood)
must not be modified or replaced with
a canopy that may be provided with
the unvented decorative room heater.
CAUTION: THE STRUCTURAL INTEG-
RITY OF THE MANUFACTURED HOME
FLOOR, WALL, AND CEILING/ROOF
MUST BE MAINTAINED.
WARNING: DO NOT INSTALL
IN SLEEPING ROOM OF MOBILE
HOMES.