NOTE: DIAGRAMS & ILLUSTRATION ARE NOT TO SCALE.
15
FIREBOX FINISHES
There are a wide variety of “fi nished looks” for your built-in Vent-Free fi rebox from formal wall
decor with elaborate mantels to rustic wood paneling or warm brick facings.
Only noncombustible materials like marble, stone, tile, brick, etc. may overlap the black front
facing. Seal all joints between the black facing and wall surrounds to prevent air intrusion. Use
noncombustible caulking material only to seal the black metal facing to the surround material on
the fi nished wall. See
Figures 3 and 23
.
Raised Hearth Extension
A hearth extension may be used but is not required for these appliances. A raised hearth extension
may be used as shown in
Figure 23
.
Raised Hearth Extension
(combustibles allowed.
No carpet or vinyl)
Combustible Platform
SIDE VIEW
Firebox Floor
Combustible Wall
Figure 23 - Raised Hearth Extension
Non-Combustible Wall
(see
Figure 4)
Fireplace Opening
* From Base to
Bottom of Firebox
Opening (fl oor)
5-3/4" Max.*
Base
APPROVED ACCESSORIES AND
COMPONENTS
Decorative Volcanic Stone
The decorative volcanic stone, Model FDVS, can
be used to enhance the look of your appliance.
Order model FDVS for replacement of stone
when needed. Spread the decorative volcanic
stone evenly around the bottom of the fi rebox.
Junction Box / Receptacle Kit
The Junction Box (J-Box) Kit is designed to be
used when an optional FBK-100 or FBK-200
Blower Kit is to be installed.
(ref. Form #750010M)
Decorative Volcanic Stone
Cat. No.
Model No.
Description
80L42
FDVS
Bag of Volcanic Stone
Junction Box / Receptacle Kit
Cat. No.
Model No.
Description
H1958
JBK
Junction Box / Electrical Kit
(ref. Form #750203M)
Decorative Screen Door Panel Kit
Cat. No.
Model
Where Used
H1959
ASD3624-TI
VRT2536WS
H1961
ASD4228-TI
VRT2542WS
Decorative Arch Screen Panel Kit
This attractive screen door is easy to install and
enhances the appearance of the appliance.
(ref. Form #750209M)
