Step 12. Install Hood
NOTE: All models must have a hood installed
prior to operating.
Refer to
Figure 30
.
Install hood by sliding it into
the slots on the lower edge of the cabinet top
.
Step 13. finishing Requirements
Wall details
Complete finished interior wall.
To install the appliance facing flush with the
finished wall, position framework to accom-
modate the thickness of the finished wall
(
Figure 30
).
For Cold Climate Insulation, see Page 5.
For Clearances, see Page 7.
Top of Appliance
1 in (25 mm) min.
Figure 30: Combustible Wall Framing
Combustible finished
Wall Materials
Combustible material
may touch appliance top.
Hood
3" Clearance min.
IMPORTANT!
Bend up standoffs
to vertical position.
Header
SUPERIOR
®
B-VENT GAS FIREPLACES • MODELS SLBV-35, SLBV-40 • INSTALLATION INSTRUCTIONS
23
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
