www.SuperiorFireplaces.US.com
126903-01A
5
LOCAL CODES
Install and use log set with care. Follow all
local codes. In the absence of local codes,
use the latest edition of
The National Fuel
Gas Code, ANSI Z223.1/NFPA 54*
.
*Available from:
American National Standards Institute, Inc.
1430 Broadway
New York, NY 10018
National Fire Protection Association, Inc.
Batterymarch Park
Quincy, MA 02269
UNPACKING
CAUTION: Do not remove
the data plates from the burner
pan. The data plates contain
important warranty and safety
information.
1. Remove logs, hearth kit, pan materials
and hardware from carton.
2. Remove all protective packaging applied
to logs and base for shipment.
3. Check appliance for any shipping dam-
age. If appliance is damaged call IN-
NOVATIVE HEARTH PRODUCTS at
1-800-655-2008 for replacement parts
before returning to dealer.
PRODUCT IDENTIFICATION
www.fmiproducts.com
115425-01F
4
3. Never install log set
•
in a recreational vehicle
•
where curtains, furniture, clothing, or
other
flammable
objects
are less than
42"
from
the front, top, or sides of the
log set
•
in high traffic areas
•
in windy or drafty areas
•
in
bedroom
or
bathroom
4. Before installing in a solid fuel
burnin
g
fi
replace, c
himne
y
fl
ue and
firebo
x
mu
st
be
cleaned of soot, creosote, ashes and
loose paint
b
y a quali
fi
ed c
himne
y cleaner.
Creosote will ignite if highly heated. Inspect
chimney
flue
for
damage
. If
damaged
,
repair
fl
ue
be
fore operating heater.
5. To reduce creation of soot, follow in-
structions in
Cleaning and Maintenance
,
page 10.
6. Installation and provisions for
combu
s-
tion and ventilation air
mu
st confor
m
with the
National Fuel Gas Code, ANSI
Z233.1/NFPA 54, Air for Combustion and
Ventilation
.
SAFETY
Continued
PRODUCT IDENTIFICATION
Figure 1 - Product Identification (Ramp Pan Burner)
Grate
Burner Pan
Burner Inlet
(Under Pan)
7. Do not run log set
•
where
flammable
liquids or vapors are
used or stored
•
under dusty conditions
8. Do not
burn
solid fuel in
fireplace
after
installing log set. Do not use this log
set to cook food or
bur
n paper or other
objec
ts.
9. To help prevent
brea
kage, new logs
mu
st
b
e
bro
ken in (see
Curing Logs
page 10).
10. Turn log set off and let cool
before
servic-
ing, installing, or repairing. Only a quali
fi
ed
service person should install, service, or
repair log set.
11. Provide adequate clearances around air
openings.
Hearth Kit Model ________________
Serial
Number
__________________
Log Set Model __________________
Left
Side
Front
Right
Side
