Operation
900285-00 05/2015
Innovative Hearth Products
Superior
TM
DRT/C3000 Series Direct-Vent Gas Fireplaces
74
6-3/4"
9-5/8"
1. Turn the burner ON/OFF switch to "OFF."
2. Turn off all electric power to the appliance if service is to be
performed.
P/N 900426-00, Rev. 0
FOR YOUR SAFETY READ BEFORE OPERATING
WARNING: If you do not follow these instructions exactly, a fire or explosion may result causing property damage, personal
injury or loss of life.
A. This appliance is equipped with an ignition device which automatically lights
the pilot. Do not try to light the pilot by hand.
B. BEFORE OPERATING smell all around the appliance area for gas. Be sure to
smell next to the floor because some gas is heavier than air and will settle
on the floor.
WHAT TO DO IF YOU SMELL GAS:
• Do
not try to light any appliance.
• Do
not touch any electric switch; do not use any phone in your building.
OPERATING INSTRUCTIONS
TO TURN OFF GAS TO APPLIANCE
• Immediately
call your gas supplier from a neighbor’s phone. Follow the gas
supplier’s instructions.
• If
you cannot reach your gas supplier, call the fire department.
C. If any portion of this appliance does not operate as the instructions indicate,
.
sl
o
o
t
e
s
u
t
o
n
o
D
.
n
a
ic
i
n
h
c
e
t
e
ci
v
r
e
s
d
e
if
il
a
u
q
a
l
l
a
c
,t
i
ri
a
p
e
r
o
t
y
rt
t
o
n
o
d
Force or attempted repair may result in a fire or explosion.
D. Do not use this appliance if any part has been under water. Immediately call
a qualified service technician to inspect the appliance and to replace any
part of the control system and any gas control which has been under water.
Copreci Gas
Valve
Switches
Electronic Pilot
Assembly
3. Close the main line gas shut-off valve.
1. STOP! Read the safety information above.
2. Read the operation section of the Installation and Operation manual.
3. Turn the burner ON/OFF switch to "OFF."
4. Turn "OFF" all electric power to the appliance.
5. This appliance is equipped with an ignition device which automatically
lights the pilot. Do not try to light the pilot by hand.
6. Wait five (5) minutes to clear out any gas. Then smell for gas,
including near the floor. If you smell gas, STOP! Follow “B” in the
safety information above on this label. If you don’t smell gas, go to the
next step.
7. Turn on all electric power to the appliance.
8. Turn the burner ON/OFF switch to ON. After approximately 4 seconds
the spark ignition system will spark for 60 seconds to light the main
burner.
9. If the appliance will not operate, follow the instructions "To Turn Off
Gas To Appliance" and call your service technician or gas supplier.
DANGER
HOT GLASS
WILL
CAUSE BURNS.
DO NOT TOUCH
GLASS
UNTIL COOLED.
NEVER
ALLOW
CHILDREN
TO TOUCH GLASS.
A barrier designed to reduce the risk of burns from the hot viewing glass is provided with this
appliance and shall be installed for the protection of children and other at-risk individuals.
Burner ON/OFF (wall switch)
Flame Height (wall switch)
Intermittent/Standing Pilot
Mode Switch (on facade)
blue wires
brown wires
yellow wires
Electronic Gas Valve (Contemporary Fireplaces)