11
•
Do not leave the device unattended during operation.
If you notice an unusual noise, overcooking of the food or smoke, stop the
cooking cycle immediately.
•
Let the food stay in the oven area at the end of the cooking time. This way, the
heat distributes better into the food.
• NOTE:
When removing cooked foods, you should wear oven mitts in order to
prevent burns.
•
Make sure not to come into contact with the
heating element (8) in the upper
oven chamber after using the grill!
• WARNING:
When using the grill function and the combination of grill/
microwave, all parts of the device including the
door (2) and the top become
very hot. Therefore, you should not touch the device housing and use only the
handles and buttons.
•
Microwave function:
Put the food on the
glass plate (7) and close the door (2).
Grill:
Put the food on the
grill rack (9)
, and then put it on the
glass plate (7) and
shut the
door (2).
Combi functions:
Put the food on the
glass plate (7) and close the door (2).
ATTENTION:
1)
The
grill rack (9) must be removed when using the microwave function
(also in combination mode)!
2) Make sure when grilling that the food does not come into contact with
the upper mounted
heating element (8).
CONNECTING DEVICE TO THE MAINS
As soon as the device is connected to the mains, a signal tone sounds and the
display 1:01 with a clock symbol occurs in the
display (5a).
SETTING THE CLOCK MODE
You can set the time in the 24 or 12-hour mode.
•
Press the
time (5c) button. A signal tone sounds and the display for the
24-
hour mode
(24h) appears with a blinking clock symbol in the
display (5a).
•
Press the
time (5c) button again briefly in order to access the
12-hour mode
. A
signal tone sounds and the display for the 12-hour mode (12h) appears with a
blinking clock symbol in the
display (5a).
SETTING THE CLOCK
Once you have selected the clock mode, you can set the clock.
ATTENTION:
The clock can be set as long as the clock symbol is blinking in the
display (5a).
•
Turn the
Time/Menu control (5h) in order to set the hour. The hour display
blinks. Once the current hour has been set, press the
time button (5c) to
confirm the setting and to be able to set the minutes.
10002124_D80D20EP_IM_V02_A120625_ktk_10-12-2012_GB.indd 11
10/12/2012 3:06 PM
