INSTALLATION ON VEHICLES WITHOUT KEY SWITCH
INSTALLATION
INSTALLATION
1. Mount the Safe-T-Lock™ / Safe-T-Lock™ Plus Programmable Code Switch with
2, #8 screws. (not provided)
Recommend mounting in a easily accessible location, such as on the dash panel.
2. Install provided bushing to protect wire from chafi ng.
3. After connected, make sure the wires are not in tension.
Mounting Panel
Bushing
GRA
Y
BLA
CK
RED
WH
ITE
WH
ITE
RE
D W
/STR
IP
E
BLU
E
Seat
Switch
(1)
BATTERY NEGATIVE
OR POSITIVE
BATTERY NEGATIVE
BATTERY POSITIVE
POSITIVE FEED TO
VEHICLE
Fuse 10A(2)
(3)
(4)
(4)
BLU
E
(1) Unit will detect if the seat switch is normally open , normally closed and switch polarity.
(2) For bigger loads, an external relay must be used.
(3) Connection not required on vehicles without key switch
(4) (STL3000 only) Blue leads fror auxillary output
SAFE
-T-
LOCK
GRA
Y
BLAC
K
RED
(BAT)
(ION)
(ACC)
(ST)
WH
ITE
RE
D W
/ST
RIP
E
Seat
Switch
(1)
BATTERY POSITIVE
Positive feed
to vehicle
Fuse 10A(2)
(3)
SAFE
-T-
LOCK
KEY SWITCH
STARTER SOLENOID
WH
ITE
(1) Unit will detect switch polarity.
(2) Switch must be normally open when seat is unoccupied
(3) For bigger loads, an external relay must be used.
(4) Automatically logs user out when key is turned off.
(5) (STL3000 only) Blue leads fror auxillary output
Mounting Panel
Bushing
BLU
E
BATTERY NEGATIVE
OR POSITIVE
BATTERY NEGATIVE
(4)
(4)
BLU
E
INPUT:
12-120
VDC
0.5
AMPS
/ 10
mA in stand by mode
OUTPUT:
Relay contact rating : 10
AMP
up to 24, 1
AMP
36
VDC
and higher
For bigger loads, an external relay must be used.
CONSTRUCTION:
Epoxy encapsulated electronics, unit is rated IP65. There are no
user serviceable parts in this unit.
TECHNICAL SPECIFICATIONS
INSTALLATION ON VEHICLES WITH KEY SWITCH
Unit to be installed by qualified technition.
Unit to be installed by qualified technition.
Unit to be installed by qualified technition.
Unit to be installed by qualified technition.
DIMENSIONS
4.23" / 107m
m
1.41" / 36mm
3.94" / 100m
m
4.23" / 100mm
0.16" / 4m
m
0.94" / 24mm
0.62" / 16mm
2.72" / 69mm
0.14" / 3.5mm
3.52" / 89mm