This fire is fitted with a flue spillage safety device (ODS). If the fire shuts down during use for no apparent reason then
several reasons may be suspected. If a door or window has been opened creating a draught, then pilot disturbance could be the
problem, and removal of the draught should resolve this. The fire can then be re-lit in accordance with the previous section. If
pilot disturbance is not the cause, then the ODS safety system may be in operation. Switch the appliance OFF, call in your installer
to check any ventilation and carry out any remedial work required. DO NOT allow the appliance to be used until the installation
is passed as safe.
Coal effect models
1. Position the combustion matrix onto the burner tray as shown in
figure 5. The front edge of the matrix should sit snugly behind the
back edge of the burner rails as shown in figure 6. Do not fit the
matrix on top of the burner rails.
2. Position the front coal strip as shown in figure 7. The rear edge of
the front coal strip should fit in front of the burner rail. Again, do not
place on top of the burner rails.
When the front coal is in posi-
tion bend up the three metal
tabs at the front of the tray to
retain as shown in figure 8.
3. Coals. All of the coals are the same. Take five coals and place them
as shown in figure 9. Care should be taken to ensure that the coals
bridge the gap between the front coal and the four coal supports at
the front of the matrix. Care should also be taken not to push the
coals right down between the coal supports, as this can detract from
the flame picture when the appliance is running.
4. Take five more moulded coals and position as shown in figure 10
to form the ‘second row’ of the fuel effect. The coals may be rotated
as desired to fit into the gaps between the coal supports in order to
create a random, realistic effect. Again, remember not to push the
coals down too far into the valleys between the coal supports as this
can have a detrimental effect to the flame picture.
5.0 FLUE SPILLAGE MONITORING SYSTEM
6.0 FUEL BED LAYOUT - COAL EFFECT
Figure 5
Figure6
Correct
Incorrect
Figure 7
Figure 8
Figure 9
Figure 10
3
©
2011 Focal Point Fires plc.
GB IE