background image

NOTE: DIAGRAMS & ILLUSTRATION ARE NOT TO SCALE.

16

Outside Air Gate & Duct Kit

Cat. No.

Model No.

Description

H3991

OAK-UVFRC

Outside Air Gate & Duct Kit

Outside Air Gate & Duct Kit

These kits have an air gate assembly, 4" diameter 

duct and a termination hood.  The air gate allows 

adjustment of the amount of outside air delivered 

to the fire for combustion. Only one  kit, located 

on the right side of the fireplace, is required. 

(ref. Form  #750206M)

Blower Kit

The FBK-100 blower provides for a constant velocity forced air circulation feature for your ap-

pliance.  The FBK-200 assembly with variable speed wall switch provides a forced air circulation 

feature for your appliance.

Black Hood 

Cat. #

Model

Models Where Used

H1989

FC36

VRT3536 Series

H1990

FC42

VRT3542 Series

* Forced Air Blower Kits

Cat. 

No.

Model No.

Description

80L84

FBK-100

Blower, Standard

(single speed)

80L85

FBK-200

Blower, Variable Speed 

(w/wall-mounted switch)

Touch-Up Paint Kit

Repair of minor scratches and 

discoloration of the appliance 

black painted surfaces may be 

accomplished with the touch-up 

paint kit.

PA I N T

The variable speed control 

rheostat is included with 

FBK-200 models only

An ON/OFF wall switch can be used 

with the FBK-100 models (field 

supplied or order P/N 85L87 Wall 

Switch Kit, shown below)

ON/OFF Wall Switch Kit

The ON/OFF wall switch kit 

may be used to control the 

blower operation, if FBK-

100 blower kit is installed. 

Install the ON/OFF wall 

switch in a convenient 

location near the fireplace.

White Wall Switch Kit

Cat. No.

Model No.

Description

85L87

FWSK

ON/OFF Wall Switch Kit

  *  The installation of these kits also require a Junction Box / Receptacle 

Kit, not included.  See ordering information on this page.

(ref. Form  #750195M)

APPROVED ACCESSORIES AND 

COMPONENTS

For more information on available log sets for this and other Superior

®

 products, visit SuperiorFireplaces.us.com.

Touch-Up Paint Kit

Cat. No. Model No.

Description

F1882

SCTPSAB Black touch-up paint, powder 

coat (for firebox face and hood)

Summary of Contents for VRT3536WH





















Reviews: