28
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
Installation Instructions
901140-00, 01/2021
Innovative Hearth Products
DRT63ST-B Power-Vent Direct-Vent Fireplace
3. Place Log "A" on the two burner studs (
see
Figure 42
).
Figure 42
Burner Studs
Log "A"
4. Place Log "C" between the 3rd and 4th grate fingers on the control
side, the landing on the end of Log "A" and resting on the main
grate support bar between the 1st and 2nd grate fingers on the
non-control side (
see
Figure 43
).
Figure 43
Log "A"
1st Grate Finger
Non-Control Side
3rd Grate Finger
Control Side
2nd Grate Finger
Non-Control Side
Main Grate Support
Log "C"
4th Grate Finger
Control Side
5. Place Log "H" on left grate crossbar and Log ""C". Slide Log "H" up
crossbar until it contacts the end of Log "C". NOTE that Log "C" has
a curved landing for Log "H" to rest in (
see
Figure 44
).
Log "C"
Log "H"
Left
Grate
Crossbar
Figure 44
6. Place Log "B" between the 4th and 5th Grate Fingers and resting
on the ledge of Log "C" (
see
Figure 45
).
Figure 45
4th Grate Finger
5th Grate Finger
Log "C"
Log "B"
7. Place Log "E" between on the 1st and 2nd Grate Fingers (
see
Figure
46
).
1st Grate Finger
2nd Grate Finger
Log "E"
Figure 46
8. Place Log "G" on Log "E" and underneath and contacting Log "H"
(
see
Figure 47
).
Log "E"
Log "G"
Log "H"
Figure 47
