Operation
900948-00C, 06/2019
Innovative Hearth Products
DRT2000-C Series Direct-Vent Gas Fireplaces
58
6.
Install back right log (4) (Figure 44). This log should be moved as far to the right as possible after installation on tab.
7.
Tear the glowing embers into dime size pieces. Place glowing embers as shown in Figure 46.
8.
Install the twig log (5) (Figure 45). This log rests on the left rear log and the grate.
Installing the DRT2000-C 35 Series Log Set (continued)
Figure 44 - Place back right log (4)
Figure 45 - Place twig log (5)
Bottom View
Bottom View
Top View
Top View
Figure 46 - Place glowing embers (rockwool)
Do NOT place embers on or close to large
ports or the pilot area.
NOTE:
Enough glowing ember material is provided for several applications.
For best glowing effect, replace the ember material annually.
This log (4) should be moved as far to the right as possible after installation on tab (e).
Left side of twig (5) will rest on landings of rear left log (3) and left front log (1) - See
Figures
42 and 43
.
NOTE: If log is not stable, it is acceptable to rotate log to the left until stable.
Fits over Tab “e”
(Figure 40)
1
1
2
4
3
2
4
3
5
