Superiorfireplaces.US.com
126745-01D
17
FIREPLACE INSTALLATION
Continued
CAUTION: Glass panels become very hot while
the appliance is operating. Do not attempt to adjust
or clean glass doors until appliance has fully cooled.
WARNING: Do not slam or strike doors. Damage
can result in a hazardous condition.
WARNING:
Discontinue use of the appliance imme-
diately if doors are damaged and contact a qualified
installer for repair. Only doors certified with the ap-
pliance shall be used.
Figure 31 - Adjusting Glass Doors
Spring Clip
Hold-Down
Screw
Side
Front
Face
Partially
Opened
Door
Figure 32 - Removing Glass Doors
Spring
Clip
Press Spring Clip
to Release Pivot
Pin
Remove
Bottom
Pin From
Pivot Plate
While
Sliding
Door Out
of the
Upper
Track
Pivot Plate
Fold Bi-Fold Door
After Releasing
Spring Clip and
Slide Door Out of
Upper Track
Doors may be removed for replacement or cleaning as follows:
1. Partially open door and press up on the upper spring clip with a
screw driver until outer top pivot pin is free of clip.
2. Fully fold frame assembly and slide upper edge toward center of
firebox opening until guide pins are free of frame rail (see Figure
32).
CAUTION: Always operate appliance with doors
either fully opened or fully closed. Operating ap-
pliance with doors partially open can result in
improper venting of flue products.