NOTE:
Read the instructions for the Water Pump, as they contain valuble information on
how to maintain this component. THIS PUMP SHOULD NEVER RUN WHEN NOT
FULLY SUBMERGED IN WATER.
SET UP
Place the Water Pump in the
SuperPonics
®
Reservoir near
the end with the channel in the
rim. Arrange the power cord of
the Water Pump into the
channel located on the rim of
the Reservoir.
6
Locate the Reservoir Lid. On
the under side of the lid,
locate the open end of the
black tubing. Attach the end of
the tubing to the connector on
the top of the Water Pump.
Retun the lid to the Reservoir.
7
Locate the Eco-185 Water Pump. Attach
the supplied 1/2” fitting to the top of the
Water Pump.
5
Summary of Contents for SuperPonics XL 12
Page 1: ...BY SUPERPONICS XL12 ...