O P E R A T I N G I N S T R U C T I O N S
24
NOTE: It is important to un-
plug all power consuming
devices (plugged into the
cigarette lighter or power
outlets). If you are receiving
errors or your display is stuck
on the “Uploading bootload-
er” screen, refer to the trouble
shooting guide at the back of
this manual for more informa-
tion.
--PROGRAMMING LEVELS--
The SCR
device comes
ready with
power levels
that can be
programmed into your vehicle’s
Power Control Module (PCM)
NOTE: Some power levels
are specifi c to certain vehicle
models. Availability may vary.
Stock
= This will program your
vehicle back to stock.
Performance
= This program
requires the use of 87+ octane
gas.
91 Performance
= This program
requires the use of 91+ octane
gas.
93 Performance
= This program
requires the use of 93+ octane
gas.
Extreme
= This program
requires 91+ octane gas.
Race
= This program
requires 93+ octane gas.
Extreme Pulley
= This program
is available only for GT500’s
with a 4lb pulley modifi cation.
91+ Octane gas is required.
To Program to a Level:
1. Select
the
power level
that best suits
your needs.
2. Follow the
instructions
on the screen. If
you choose to
Create a custom
program
, continue to the Cus-
tom Options section.
CAUTION: Only program while
the vehicle is parked and
away from traffi c, or where the
vehicle may impede access or
exit. Programming will take
several minutes and the ve-
hicle can not be started.
P R O G R A M M I N G T H E V E H I C L E
P R O G R A M M I N G T H E V E H I C L E
