5
Steering Stop Installation
A
Fig. 1
B
Fig. 2
(Steering Gear Box shown off machine for clarity)
Note: Driver Side installation is shown.
1. Unclamp and slide Boot away from Steering Gear Box.
2. Install Steering Stop Bushing (A) onto shaft and slide until flush with outside of Steering Gear Box.
See Fig. 1.
3. Reinstall Boot with 10-7/8” Lg. Cable Tie (B). See Fig. 2.
4. Repeat steps for opposite side.
Item
Description
A
Steering Stop Bushings
B
10-7/8” Lg. Cable Tie (Driver Side)
C
8” Lg. Cable Tie (Passenger Side)
PARTS REFERENCE
