Superabrasive LAVINA 38GR -X, User Manual

Page: 5 / 58

Superabrasive
Owner’s Manual – Lavina
®
38GR-X 08/2017
5
1. GENERAL INFORMATION
This owner’s manual is intended for the operator of the Lavina ®
38GR-X machine, the servicing technician as well as
anyone involved with operating or servicing the machine. We recommend that you read the instructions very carefully
and follow them strictly. The manual includes information about assembling, using, handling, adjusting and maintaining
your Lavina
®
38GR-X floor grinding and polishing machine.
MANUFACTURER
Superabrasive was founded in 1987, as a manufacturer of high quality diamond tools for the stone and concrete
industry. Today, Superabrasive is one of the world’s leading companies in the production of diamond tools and floor
grinding machinery. At Superabrasive, we strive to deliver the very best solutions to our customers, and enable them to
work more efficiently.
GENERAL DESCRIPTION
The Lavina
®
38GR-X machine is intended for grinding, polishing and buffing concrete, marble, granite, limestone and
terrazzo surfaces with diamond tools.
The Lavina
®
38GR-X is a three-disc machine with remote control designed for wet and dry use.
For best results, use only tools manufactured or recommended by Superabrasive and its distributors.
WARNING!
The Lavina
®
38GR-X machine is manufactured and fitted for the above-mentioned applications only! Every other use
may possess risks to the persons involved.
MACHINE CHARACTERISTICS
The Lavina
®
38GR-X is made of two main
component sections:
LAVINA
®
38GR-X MAIN DESIGN
The two main component sections are the
carriage and the main head.
The wheels of the carriage are driven by two gear
boxes that allow the operator to work with the
machine from a distance. The handle on the frame is
adjustable in height and enables the operator to work in a correct, safe
posture.
Two halogen spotlights (Fig.1.2) enable the operator to work in darker areas. The lamp holder is fully adjustable.
Lighting system does not replace adequate overhead lighting.
A frame (U-joint technology) on top of the motor base enables the main head to move in any direction and
increases its grinding capacity.
Remote Control Unit (fig.1.3)
The control panel for local operations
(fig.1.4) is positioned on top of the frame and contains switches that allow the
operator to start/stop the engine, apply the electromagnetic clutch, and navigate the machine.
The electrical box (fig.1.1) contains the electrical switches and inverters. There are two plugs on the top side of the
box. The left (smaller) includes the control circuits of the engine, the generator and the gas valve. The main feeding
cable is connected with a plug and socket on the right side of the box. The battery is situated under the electrical box.
Figure 1.2
Figure 1.1
Figure 1.3
Figure 1.1
Figure 1.4