Superabrasive
Owner’s Manual Original Language – Lavina
®
38GR-X
08/2017
37
Figure 8.11.1
the nut and and tighten the belt more. When the necessary tension of the belt is reached (Fig. 8.10.9) (Fig. 8.10.10),
replace the cover and fastening bolts.
8.11 TENSIONING AND REPLACING THE TRANSMISSION BELT
The transmission of the machine has one maintenance-free timing belt. To
change the belt, remove all holders and dismount their adaptors. Dismount
the sealing. Carefully check the friction surface (flanges of the lower cover
and the outside diameter of the adaptors). Decide if they are in good
condition (wear, smoothness of surface) and whether they can work until
next inspection. Remove the bottom cover by unscrewing the bolts around
the edge and the three bolts of the spacers. (Fig.8.11.2). Under the cover
there is a sealer around the edge, and the spacers have O-Rings. It is
recommended to change all seals with the belts.
Figure 8.11.2
Figure 8.11.3
Figure 8.11.5
Figure 8.11.4
Figure 9.9.6
Figure 8.10.14
Figure 8.10.15
Summary of Contents for LAVINA 38GR -X
