manualshive.com logo in svg

Superabrasive Lavina 20, Owner'S Manual

Share
Download
Superabrasive Lavina 20 Owner'S Manual Download Page 11

Superabrasive 

Owner’s Manual - Lavina 20

®

  

09/2009 

 

Refers to Lavina 20

®

 Lavina 20

®

E 

 

11

 

Figure 7 

 

 

Figure 8 

 

Transportation

 

 
The Lavina 20

®

 is engineered with easy transportation in mind. The ability to dismantle the machine in two 

parts adds to its convenient transportation and storage (Fig.9 and Fig.10) 
Always store and transport the Lavina 20

®

 in a dry place. Never transport the Lavina 20

®

 unprotected; it 

may be damaged if transported unprotected during rain or snow.  
 

 

Figure 9

 

 

Figure 10 

 
 

OPERATION

 

 

Preliminary Controls 

Inspect the working area as explained in the safety instructions. 
For wet use - fill in the water tank when the electrical cable is disconnected. Connect the vacuum 
extractor to ensure that the vacuum hose is clear and it will follow the machine easily. Plug in the machine 
and also make sure that the power cord is free to follow the working direction of the Lavina 20

®

.  

Summary of Contents for Lavina 20
























































Reviews:

No comments

Brands by name

Popular brands

Load more brands