Superabrasive Owner’s Manual orginal language –
Lavina 20®N Pro/20®NHV Pro
2/2012
1. GENERAL INFORMATION
This owner’s manual is intended for the operator of the Lavina 20®N Pro/20®NHV Pro machine, the servicing
technician as well as for anyone involved with operating or servicing the machine. We recommend that you read the
instructions very carefully and follow them strictly. The manual includes information about assembling, using, handling,
adjusting and maintaining your Lavina 20®N Pro/20®NHV Pro floor grinding and polishing machine.
MANUFACTURER
Superabrasive was founded 24 years ago, in 1987, as a manufacturer of high quality diamond tools for the stone and
concrete industry. Today, Superabrasive is one of the world’s leading companies in the production of diamond tools and
floor grinding machinery. At Superabrasive, we strive to deliver the very best solutions to our customers, and enable
them to work more efficiently.
GENERAL DESCRIPTION
The Lavina 20®N Pro/20®NHV Pro machine is intended for grinding, polishing and buffing concrete, marble, granite,
limestone and terrazzo surfaces with diamond tools.
The Lavina 20®N Pro/20®NHV Pro is a three-disc machine, which can be used dry as well as wet.
For best results, use only tools manufactured or recommended by Superabrasive and its distributors. Additionally, the
machine could be used for grinding wood floor surfaces.
WARNING!
The Lavina 20®N Pro/20®NHV Pro machine is manufactured and fitted for the above-mentioned applications only!
Every other use may possess risks to the persons involved.
MACHINE CHARACTERISTICS
The Lavina 20®N Pro/20®NHV Pro is made of two main component sections:
LAVINA 20®N PRO/20®NHV PRO MAIN DESIGN
•
The two main component sections
, the
carriage and main head.
The handle on the frame is adjustable in height and
allows the operator to work in a correct and safe
posture.
•
The halogen spotlight
(Fig.1.2) enables the
operator to work in darker areas.
Existing lighting system does
not replace adequate overhead lighting.
•
The frame
•
The controls
are positioned on top of the electrical box (fig.1.3)
•
The electrical box
(fig.1.3) contains the electric switching devices and the
inverter. The motor feeding cable and the main feeding cable are plugged in the socket
located on the bottom of the box.
•
The water tank
is on the opposite side of the frame, so that the weight of the
water has no influence on the operation of the machine. The frame weight, on the
other hand, is fully absorbed by the driving wheels.
•
The motor
is mounted on the base plate and is driving the three heads with a belt
system. The planetary motion derives from the friction between the tools and the
floor, which is allowing the tools to spin in either clockwise or counterclockwise
direction. The design ensures that the tools will not force themselves against the resistance of the floor surface.
Instead, the machine will alternate directions to accommodate to a “high spot” or a “low spot” imperfections in the
floor without causing damage to the floor or the machine.
Figure 1.3
Figure 1.2
Figure 1.1
