Superabrasive
Owner’s Manual - Lavina 16
®
10/2009
Refers to Lavina 16
®
31
Figure 47
Figure 48
•
check the rollers. They can be removed by securing the roller from the top of the shaft and releasing the
nut underneath (Fig.49 and Fig.50). Here also, you may pull lightly with the crowbars. Do not forget to
check the tension device. Replace the complete unit if it is necessary.
•
Figure 49
Figure 50
•
re-assemble in the same manner very carefully (Fig.51 and Fig.52)
Figure 51
Figure 52
•
Mount back the belt.
- Mount the orange belt replacing tool. Turn the belt replacing tool in down position.
- Lay the belt with only 1/2 of its width showing over the pulleys (Fig.53), and slowly begin to turn the belt
replacing device and pulleys (Fig.54).
-Keep turning until the belt is on the pulleys.
