Superabrasive
Owner’s Manual - Lavina 16
®
10/2009
Refers to Lavina 16
®
27
TROUBLESHOOTING
Index of Problems and Solutions
Replacing Power Cord and Plugs:
When replacing the power cord or plugs always use cords and plugs with same specifications as the
original ones (Fig.29). Never use lower quality or different type cords or plugs.
Figure 29
Replacing Belt and Pulley Units:
In this section, we explain how to replace the belt and the pulley unit. In some instances the belt can be
replaced without replacing the pulley unit, although it is always necessary to ensure that the pulley units
are working properly. Later in this chapter we will explain how to check the pulley units.
•
disconnect the extension cord from the power line and pull out the hoses (Fig.30 and Fig.31)
Figure 30
Figure 31
•
pull the handle out and put the main head of the machine in a position suitable for changing the tool.
•
dismount the tools (Fig.32)and put the head back down on the floor.
