Figure 32
•
pull the water hose out from the tank (Fig.33 )
•
unplug the electrical cord from the socket located on the bottom of the electrical board.
•
remove the two pins from the brackets (Fig.34)
•
separate the carriage from the head (Fig.35)
Figure
33
Figure
34
Figure
35
•
dismount the guard assembly( Fig.36)
•
dismount the cover:
unscrew the machine support, the handle, the back supports and the cross-bars and put them aside,
place the plug on top of the motor,
remove all the bolts attaching the upper cover to the disc,
remove the cover by pulling it over the motor.
Figure 36
Figure 37
•
mount back the handle as this will make it easier to turn over the main head (Fig.37)
•
remove the plate holders:
