CONFORMITY WITH IEC60601-1 (2nd
Edition)
"
The manufacturer, assembler, installer or
distributor are not considered to be responsible
themselves for the consequences on the safety,
reliability and characteristics of a device unless
the:
•
Assembly, fitting, extensions, adjustments,
modifications or repairs have been performed
by persons authorized by the party in
question.
• Electrical installation of the corresponding
premises complies with local electrical
codes. (e.g. IEC / NEC).
• Device is used in accordance with the
instructions for use.
If the replacement parts used for the periodic
servicing by an approved technician do not
comply with the manufacturer’s specifications,
the manufacturer is not responsible in the event
of an accident.
1. UNPACKING and PACKAGING
The Oxygen Concentrator is packaged to
protect the device from damage while being
transported and stored. Check for damage to
the packaging. After device is removed from
the package inspect for damage. If damage
is detected please contact your equipment
provider. Operating environmental condi
-
tion guidelines are discussed later in another
section of this User's Guide.
1.1 METHOD FOR WASTE DISPOSAL
All waste from the device (Patient Circut,
Filters, Etc.) must be disposed of using methods
appropriate to the civil authority of the location
where disposed.
2.0 METHOD FOR DISPOSING OF
DEVICE
This device has been supplied by an environ
-
mentally aware manufacturer. A majority of the
parts in the device are recyclable.
Follow local governing ordinances and recy
-
cling plans regarding disposal of the device or
components normally used in operation. Any
accessories not original to the device must be
disposed of in accordance with the individual
product markings for disposal.
