Super X8DT3, User Manual

Page: 80 / 98

4-20
X8DT3/X8DTi/X8DT3-LN4/X8DTi-LN4 User’s Manual
Timestamp
•
Generator ID
•
Event Message Format User
•
Event Sensor Type
•
Event Sensor Number,
•
Event Dir Type
•
Event Data.
•
Clear BMC System Event Log
Clear BMC System Log
Select OK and press the <Enter> key to clear the BMC system log. Select Cancel
to keep the BMC System log. The options are OK and Cancel.
Caution : Any cleared information is unrecoverable. Make absolutely sure
that you no longer need any data stored in the log before clearing the
BMC Event Log.

Set LAN Confi guration
Set this feature to confi gure the IPMI LAN adapter with a network address as shown
in the following graphics.
Channel Number
Enter the channel number for the SET LAN Confi g command. This is initially set
to [1] . Press "+" or "-" on your keyboard to change the Channel Number.
Channel Number Status
This feature returns the channel status for the Channel Number selected above:
"Channel Number is OK" or "Wrong Channel Number".
IP Address Source
This features allows the user to select how an IP address is assigned to a cli-
ent computer or network device. Select DHCP (Dynamic Host Confi guration
Protocol) to allow a client (computer or device) obtains an IP address from a
DHCP server that manages a pool of IP addresses and network information on
a "request and grant" basis. Upon time-out (or lease expiration), the IP address
assigned to the client can be reassigned to a new client. Select Static (Static