Chapter 2: Installation
2-3
2-3 Processor and Heatsink Installation
When handling the processor package, avoid placing direct pressure on
the label area of the fan.
Notes:
Always connect the power cord last and always remove it before adding, re-
1.
moving or changing any hardware components. Make sure that you install the
processor into the CPU socket before you install the CPU heatsink.
Make sure to install the motherboard into the chassis before you install the
2.
CPU heatsink and heatsink fans.
When purchasing a 5500 Series processor or when receiving a motherboard
3.
with a 5500 Series processor pre-installed, make sure that the CPU plastic
cap is in place, and none of the CPU pins are bent; otherwise, contact the
retailer immediately.
Refer to the MB Features Section for more details on CPU support.
4.
Installing an LGA 1366 Processor
Press the socket clip to release
1.
the load plate, which covers the
CPU socket, from its locking
position.
Socket Clip
!
Load Plate
Gently lift the socket clip to
2.
open the load plate.
Hold the plastic cap at its north
3.
and south center edges to re-
move it from the CPU socket.
Plastic Cap
Hold the north & south edges of
the plastic cap to remove it
Summary of Contents for X8DT3
Page 1: ...X8DT3 X8DTi USER S MANUAL Revision 1 0a X8DT3 F X8DTi F X8DTi LN4F X8DT3 LN4F ...
Page 22: ...1 14 X8DT3 X8DTi X8DT3 F X8DTi F X8DT3 LN4F X8DTi LN4F User s Manual Notes ...
Page 92: ...A 2 X8DT3 X8DTi X8DT3 F X8DTi F X8DT3 LN4F X8DTi LN4F User s Manual Notes ...
Page 98: ...C 4 X8DT3 X8DTi X8DT3 F X8DTi F X8DT3 LN4F X8DTi LN4F User s Manual Notes ...
