Chapter 2: Installation
2-15
Installing the Motherboard
1.
Install the I/O shield into the back of the chassis.
2. Locate the mounting holes on the motherboard. (See the previous page.)
3. Locate the matching mounting holes on the chassis. Align the mounting holes
on the motherboard against the mounting holes on the chassis.
4. Install standoffs in the chassis as needed.
5. Install the motherboard into the chassis carefully to avoid damaging other
motherboard components.
6. Using the Phillips screwdriver, insert a Phillips head #6 screw into a mounting
hole on the motherboard and its matching mounting hole on the chassis.
7. Repeat Step 5 to insert #6 screws into all mounting holes.
8.
Make sure that the motherboard is securely placed in the chassis.
Note:
Images displayed are for illustration only. Your chassis or system
components may or may not look exactly the same as graphics shown
in this manual.
