Super X10DRi User Manual Download

Page: 99 / 117

Chapter 4: AMI BIOS

4-29

4-4 Event Logs

Use this feature to configure Event Log settings.



Change SMBIOS Event Log Settings

This feature allows the user to configure SMBIOS Event settings.

Enabling/Disabling Options

SMBIOS Event Log

Select Enabled to enable SMBIOS (System Management BIOS) Event Logging
during system boot. The options are

Enabled

and Disabled.

Runtime Error Logging Support

Select Enabled to support Runtime Error Logging. The options are Enabled and

Disabled

. If this item is set to Enable, the following item will be available for con-

figuration:

Memory Corrected Error Enabling (Available when the item above-Runtime

Error Logging Support is set to Enable)

Select Enabled for the BIOS to correct a memory error if it is correctable. The op-
tions are Enabled and

Disabled

PCI-Ex (PCI-Express) Error Enable

Select Enabled for the BIOS to correct errors occurred in the PCI-E slots. The op-
tions are Enabled and

Disabled

Summary of Contents for X10DRi






















































































































Search results

Summary of Contents for X10DRi

Reviews:

Related manuals for X10DRi

Brands by name

Popular brands

Super X10DRi, User Manual

Search results

Summary of Contents for X10DRi

Reviews:

Related manuals for X10DRi

Brands by name

Popular brands