SC505 Chassis Manual
5-4
Installing 2.5" Hard Drives
2QH WR IRXU KDUG GULYHV PD\ EH LQVWDOOHG LQ VHYHUDO GLIIHUHQW FRQ¿JXUDWLRQV
6HHWKHVXSSRUWHGFRQ¿JXUDWLRQRSWLRQVRQSDJH
Installing 2.5" Hard Drives
1. Power down the system as described in Section 5-2 and remove the cover.
2. Install the hard drives into the hard drive brackets and secure them to the
bracket with the screws provided, as illustrated in Figure 5-2.
3. Place the hard drives and brackets into the chassis as illustrated in Figure 5-2
or Figure 5-4 on the following page. Orient two or more drives with the cable
connections facing the left of the chassis.
4.
6HFXUHWKHKDUGGULYHEUDFNHWVWRWKHFKDVVLVÀRRUE\LQVHUWLQJWKHVFUHZVXS
through the underside of the chassis.
5. Connect the hard drive wiring.
6. Reinstall the chassis cover and power cord, then power up the server.
Note
: Bracket ordering information:
t
For single drive height, part number MCP-220-00051-0N
t
For double drive height, part number MCP-220-00044-0N