Super Sealer REI-90F, Operation & Maintenance Manual

Page: 7 / 17

Updated: 10 October, 2009 Page 7 REF: REI-90-0611
ON OR OFF SELECTIONS
The machine will not be performed the function when the setting is set to OFF.
FILL GAS FLUSH
”RESET”
Changes the computer operating function.
Right display: displays the temperature in the normal operation, when an error occurs it shows
the error code, and displays parameter values when the machine is under set mode.
Up and Down: to increase or decrease one unit of value.
Left display: counter number display. It also shows the computer program form “P0” TO
“P11”
5. Resetting Computer Program
No. Description Range Set in Factory
P
1-1
The 1st SET of upper
mould heater.
030-220 C
130
P
1-2
The 2nd set of upper
mould heater.
030-220 C
130
P
1-3
Printer heater. 030-220 C
100
P2 Calculator lock/open Lok: Lock (can’t rest) Opn :Open (can set) Opn
P3 Sealing time 001~030 unit ( 0.1sec~3 sec) 010
P4 Cup waiting time 000~030 unit ( 0 sec~3 sec) 010 unit (1sec)
P5
Rolling film and printer 000(eyemark control and 1st printer or no-printer)
set P8 ” ▲ ”or “ ▼ ”
001(encoder control and 2nd printer)
set P6 ” ▲ ”or “ ▼ ” set P7 ” ▲ ”or “ ▼
”
set P8 ”
▲
”or “
▼
”
002(eyemark and 2nd printer)
set P7 ” ▲ ”or “ ▼ ” set P8 ” ▲ ”or “ ▼ ”
003(encoder and 1st printer or no-printer)
set P6 ” ▲ ”or “ ▼ ” set P8 ” ▲ ”or “ ▼ ”
004~060(non-printed film controlled by timing)
set P8 ” ▲ ”or “ ▼ ”
01
P6
Non-printed film by
encoder control
001~255 unit (1unit=2mm) 128
P7 The 2nd print position 001~199 unit (0.1~19.9) 52
P8 Printer choice
000(stop printing function)
001:moter type of printer (002~030):air type printer
04
P9 Gas Flush Time
000-100
10
A. When resetting the computer program: check from P1 to P8 in numerical order.