Updated: 10 October, 2009
Page 12
REF: REI-90-0611
•
Removing the black screw
•
Holding the bottom part of the upper mould, slowly pull/ slide out
6.2
Lower Mould
Lower Mould Function
The main function of the lower mould is to hold the containers on their position for the sealing
and the cutting function.
Exchanging
Simply remove the black screw from the bottom of the lower mould and pull out the lower
mould.
9.
Maintenance and Cleaning
ELECTRICAL HAZARD
Always REMOVE the machine from the power outlet before performing any maintenance or
cleaning works.
BURN HAZARD
• Cleaning and maintenance should be performed by your trained personnel only
• Allow unit to cool at least 90 minutes before normal cleaning
