MOVING
For cutting convenience, it may be best to start mowing at a point close to the power supply
and to work your way away from the supply. Mow the lawn at a right angle from the power
supply and place the power cable to side which has already been cut (See Fig. 8).
When mowing do not allow the motor to labour particularly in heavy conditions. When the
motor labours the speed of the motor drops and you will hear a change in the motor sound,
when this occurs stop mowing, release the switch lever and raise the height of cut. Failure to
do so could damage the machine.
NOTE:
the motor is protected by a safety cut out which is activated when the blade becomes
jammed or if the motor is overloaded.
When this occurs, stop the machine and remove the
plug from the power supply. The safety cut out will only reset when the switch lever 10 is
released. Clear any obstruction and wait for a few minutes for the safety cut out to reset
before continuing to mow At this time do not operate the switch lever 10 as this will
prolong the reset time of the safety cut out. If the mower cuts out again, increase the
height of cut to reduce the load on the motor.
Fig. 8
Size: 145x210mm
REV 05/19/21
157
克铜版纸
Great Circle USA
Support Line: 1-866-493-0524
www.greatcircleus.com
