3
Interruptions of work:
1. Never leave the Electric Lawn Rake unattended at the working area.
2. If you interrupt your work store the unit in a Safe place. Disconnect the mains plugs! When
you interrupt work in order to go to another working area. always switch off the Electric Lawn
3. Rake during transport. Put The wear compensation lever in the transport Position.
If you come into contact with an obstruction during aerating:
1. Turn off the Electric Lawn Rake.
2. Remove the obstruction.
3. Check the Electric Lawn Rake for damaged and have it repair if necessary.
ASSEMBLY
1. Attach the cable hock
①
to the upper handle
⑦
(See Fig. 3).
2. Insert the lower handle
②
into the circumgyrate block
③
. Then insert the knob
④
from
outside through the hole in the lower handle
②
.Attack the bolt in the Knob
④
to the Lawn
Rake (See Fig. 2).
3. Insert the two locking bolts
⑤
from inside through the
hole in the upper handle
⑦
and secure to the lower
handle
⑤
with two wing nuts
⑥
(See Fig. 3).
4. Fitting Fully Assembled Grassbox to Lawnmower (See Fig. 4).
a. Lift the safety guard
⑧.
b. Make sure the discharge chute is clean and free from debris
c. Locate fully assembled grassbox onto location points at the
rear of the deck as illustrated.
d. Locate safety flap onto the top of the grassbox.
Ensure the grassbox is easy locate.
Note:
For non grass collection the mower can be used
without the grassbox in position, with the safety
guard
⑧
in the down position.
Fig. 1
Fig. 3
Fig. 4
1
2
1
7
6
6
8
9
5
5
Fig. 2
2
3
4
