Super Circuits DMR22-3 Series, User Manual, Page: 56 / 70

56
Configuring Cameras
Adding and Removing Analog Cameras
Analog cameras can be enabled and disabled in the Add/Remove Cameras menu.
To manage analog cameras:
1.
Enter the Add/Remove Cameras menu, shown in Figure 47 by going to Main Menu > Cameras Setup >
Add/Remove Cameras.
2.
Select the
Analog
tab. This will open the Analog Camera Management menu, shown in Figure 47.
Figure 47. Add/Remove Cameras > Analog Menu
3.
To enable a camera, check the box below the camera number. To disable a camera, uncheck the box. You may
also check and uncheck All to enable and disable all cameras.
4.
Select the Save button to save the camera settings and select Exit to return to the previous menu. Selecting the
Exit button without clicking Save will quit out of the menu without saving settings. Setting up Privacy Zones
Privacy zones can be setup to mask off sensitive or private areas in the field of view of a camera.