Super Circuits DMR22-3 Series, User Manual

Page: 46 / 70

46
•
Advanced Control:
Manage hard disk drives (initializing and setting properties for HDDs). Ability to remote
update system firmware and stopping of the relay output.
•
Live View:
Access the Live Feed.
•
PTZ Control:
Control PTZ cameras.
•
Configuration:
Configure parameters, restore parameters to factory defaults and import settings to as well
as export settings from DVR.
•
Video Output Control:
Configure settings for video output.
•
Alarm Control:
Alert or control the relay output of the DVR. Alarm and exception settings must be
configured properly to upload to host.
•
Shutdown/Reboot:
Shutdown or reboot the DVR.
•
Playback:
Playback recordings remotely.
•
Camera Management:
Enable and disable analog channels. Add and delete IP cameras.
•
All:
Full permission to use all functions.
5.
Click the Save button to save user settings and click Done to return to the previous menu.
Note: If you forget the password to your DVR, contact your supplier with the serial number of your DVR to obtain a
secure code to reset your DVR.
Note:
The password of the Admin user can be modified in the Lock Menus menu (See
Locking and Unlocking System
Menus
on page 91).
Deleting a User
To delete a user from the DVR:
1.
Enter the Remote User Settings menu, shown in Figure 38 by going to Main Menu > System Configuration > Remote
User Settings.
2.
Select a user to delete in the
Remote Users List
panel.
3.
Click the Remove button to delete user.
4.
Click the OK button to confirm deletion of user.
5.
Click the Done button to exit menu.
Editing a User
To edit a user:
1.
Enter the Remote User Settings menu, shown in Figure 38 by going to Main Menu > System Configuration > Remote
User Settings
2.
Select a user to edit in the
Remote Users List
panel.
3.
Edit user information in the
Users
and
Remote Permissions
panel. Remote permissions are defined above in
Adding a
New Remote User
on page 54.
4.
Click the Done button to exit menu.