940-GSM4
2 Precautions
2
Precautions
•
The camera operates on 6 volts DC.
•
Always install batteries according with the polarity indicated.
•
You must install an SD card before using on the camera. The camera has
no internal memory for saving images or videos.
•
Set the SD card write-protect switch to Unlock before installing the card.
•
Do not install or remove the SD card when the camera is powered on.
•
Make sure the SIM card supports the MMS and GPRS data function.
•
After entering SETUP mode, allow approximately 10 ~ 20 seconds for
the camera to acquire a signal.
•
Before using the SD card, format it with a computer or when it is in the
camera. SD cards formatted by other cameras may not be compatible
with the 940-GSM4.
•
In SETUP mode, the device will shut off automatically after 3 minutes of
inactivity. Power on the camera again if you need to continue.
7
