13
Be in charge
Super B
2.7.3. Con 3 (CANopen; 5-pin “micro” style connector)
PIN #
Signal
Description
1
CAN_SHLD
Optional CAN Shield
2
CAN_V+
Optional CAN external positive supply
(dedicated for supply of transceiver and
optocouplers. if galvanic isolation of the bus
node applies)
3
CAN_GND
Ground / 0V
4
CAN_H
CAN_H bus line (dominant high)
5
CAN_L
CAN_L bus line ( dominant low)
Table 11. Con 3 (CANopen; 5-pin “micro” style connector)
2.8. Peripheral equipment
2.8.1. Obligatory
In order for the Li-ion battery to be used safely, an external switch off device must be
installed. This should either be a relay or latching relay (bi-stable) controlled by the battery’s
BMS or a relay or latching relay controlled by a remote switch (CAN controlled). If an
external switch off device is not installed the warranty of the Li-ion battery will be void.
