Harness User’s manual
| STRIKE 2
SUPAIR
| STRIKE 2
| page 28
Install the accelerator by following the previous ins-
tructions.
Connect it to the wing using the split hooks.
Once the accelerator/speedbar is connected, adjust
its length according to your measurements.
Without twisting the risers, connect them to the har-
ness attachment loops using the self-locking carabi-
ners.
Check for the risers to be properly positioned and
untwisted. The «A» risers must be located at the
front and facing the flight direction (see diagram).
Lastly, check for the main self-locking carabiners to
be fully closed and locked in place.
For correct use, there
must not be any ten-
sion at the split-hook
level when the accele-
rator/speedbar line is
fully relaxed.
Connection wing - harness
Installing the accelerator
1
3
5
2
4
6
7
8
1
3
5
2
4
6
7
8
Flight direc
tion
Plume Grivel
Carabiners
Flight direction
Connect
CONNECTING THE WING TO THE HARNESS
