Harness User’s manual
| STRIKE 2
SUPAIR
| STRIKE 2
| page 13
Compatible speed-bar :
Speedbar assembly :
Regarding either side of the harness: :
2B Light Speedbag : ACCEL2BLIGHTSPBG
ACCESSORIES ASSEMBLY
Speed-bar system
Be careful, make sure the speedbar is not set too short. It could be dangerous. When you are not using the speedbar,
the line should not be under tension at your risers.
Pass the elastic bands through the triangles of the
lower foot plate and tie a maintenance knot.
Pass the lines through the guide ring under the seat.
Pass the speedbar line through the pulley located on the
side of the harness, passing as close as possible to the
chassis
Bring out the line through the opening in the side of the
speedbag.
Finally, attach a hook to the line so that it can be connected to
your paraglider’s speedbar system.
Check the operation of the speedbar by simulating acceleration, ie
by sliding the line.
1
4
5
3
2
1
2
3
4
5
6
