Harness User’s manual
S
UP’AIR
_
PIXAIR
Page 21
Without twisting the risers, connect them to the harness attachment loops using the self-locking
carabiners.
Check for the risers to be properly positioned and untwisted. The «A» risers must be located at
the front and facing the flight direction (see diagram).
Lastly, check for the main self-locking carabiners to be fully closed and locked in place.
Connecting the wing to the harness.
Connecting the wing to the harness.
Install the accelerator by following the pre-
vious instructions.
Connect it to the wing using the split hooks.
Once the accelerator/speedbar is connected
adjust its length according to the wing recom-
mended measurements.
For correct use there must not be any line ten-
sion at the split hook level when the accelera-
tor/speedbar line is fully relaxed.
Installing the accelerator.
Self-locking
carabiners.
Harness
Flight direction.
« A » risers
left side.
