Harness User’s manual
S
UP’AIR
_
PIXAIR
Page 17
Installing the reserve parachute in its container.
1.
- Place the reserve parachute inside
the container, with the handle positioned
upward, and parachute risers downward.
2.
- Take a small piece of line to help with the
installation procedure.
- Push it through loop #1 ( B flap).
- Using the piece of line pull loop #1 through
grommet #2 – flap ©...
Installing the reserve parachute.
1
2
1
3.
- Secure the installation by pushing the
right side of the yellow cable through the
loop cord #1
Carefully remove the line.
4.
- Using the piece of line pull loop #3
through grommet #4 – flap (D)...
- ... then inside grommet #5 – flap C
- then inside grommet #6 – flap (A)
1
3
4
5
6
1
5.
- Secure the installation by pushing the
left side of the yellow cable through the
loop cord #3
Carefully remove the line.
1
6
5.
- Fasten the reserve parachute handle to
the Velcro®
- Push the two outer ends of the reserve
parachute handle inside their respective
housings located on either side of the
handle on the harness.
Check the com-
pleted instal-
lation during a
hang-test.
Have the installation
checked by a professional
outfit.
Conduct an extrac-
tion test every six ( 6 )
months to assure proper
system functionality.
Note : conducting and
extraction test does not
imply deploying the
reserve parachute which
will stay inside its POD.
A
B
C
D
E
A
B
C
D
C
