SUP’AIR manufactures its products in Europe. Most of the components used are Made in Europe.
S
UP’AIR_
E
VO
XC
3
Page11
User’s manual EVO XC3
Push the accelerator cord through the lat-
eral skirt slot.
Installing the speed-bar system.
The EVO XC3 is pre-equipped to use a speed-bar as most of our harness models are. Within
the SUP’AIR gear lineup, the standard speed-bar is the most adaptable for being the light-
est and self-retractable.
4
3
2
1
Push the accelerator cord through the
guiding tube.
Push the speed-bar line through the pulley.
Attach the end of the speed-bar lines to the
crimped hooks which is to be connected to
the riser’s crimped hooks. Adjust the lines
length and securely knot it.
A
Lines
B
C
Crimped hooks
Elasticated self-retrac-
table speed-system
Self-retracting speed-system: push the
elastic cords through the ( D ) ring to con-
nect them to the white loop stitched on the
inner sides of the harness.
5
A
C
If the foot rest is not used, the lateral skirt
can be folded over and around the guid-
ing tube and close by pressing the button.
6
E
1
3
4
5
2
D
F
D
E
(D) shaped buckle.
Elasticated
recoil cord.
Elasticated recoil cord.
Speed-bar cord.
F
5
Summary of Contents for EVO XC3
Page 38: ......
